Making And Answering Calls - Nortel Enterprise Edge M7208 User's Card Manual

Making and answering calls

Answering calls
Making calls
¬
∆
˙
©
Page 2 Enterprise Edge M7208 User Card
Answering calls using the handset
When your telephone rings, or
1. Lift the handset.
OR
Press the key beside the flashing
Answering calls using Handsfree
When your telephone rings, or
1. Press
©
Depending upon the dialling mode programmed on your telephone, you may
have to lift the handset before making a call.
External calls using numbered line keys
1. If you do not have an external Prime line, press a line key.
2. Dial your call.
External calls using Intercom keys
1. Lift the handset.
2. If appears beside an Intercom key, enter a line pool access code.
º
OR
Press an Intercom key without
3. When you hear external dial tone, dial your call.
Internal calls using Intercom keys
1. If you do not have an internal Prime line, press
2. Dial your call.
Note: Line pool access codes and extension numbers are supplied by your
System Administrator.
Making calls using Handsfree
1. Press
©
Holding Calls
1. Press
˙
2. Press the line key with the flashing
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
Exclusive hold
Use Exclusive Hold (
can be retrieved only at your telephone.
System Administrator can program Handsfree for your telephone.
Switching between Handsfree and handset
1. Press
©
2. Pick up the handset to switch back.
Using Mute
1. Press
©
2. Press
©
flashes beside an Intercom or line key:
º
before lifting the handset.
º
flashes beside an Intercom or line key:
º
.
, then enter a line pool access code.
º
instead of lifting the handset.
. The flashes beside the line on hold.
º
º
ƒ˙
and replace the handset to switch to Handsfree.
to turn the microphone OFF.
again to turn the microphone ON.
∆
to return to the call.
) to keep a call on hold so that it
.