Table of Contents
Advertisement
240 / General System features
•
Also on these sets, you can answer a second call by
pressing
connected to the waiting call. You can have no more than
two calls at a time.
There is no Handsfree button on these sets. When applicable,
special instructions for the sets are included with each feature
description.
Memory buttons
Memory buttons are the buttons with indicators on the M7208,
M7310, M7324, T7208, and T7316 sets. The M7310 also has
dual buttons without indicators. There is a single memory
button, without an indicator, on the M7100 and the T7100 sets.
Memory buttons can be used as answer, autodial, line, and
programmed feature buttons. Line, intercom and answer
buttons must have indicators.
One-line display
The M7100, M7208, T7100 and T7208 sets have a one-line
display. Other sets have a second line on the display which
shows the functions of the three buttons directly below it.
These indicators are known as display buttons.
Some display buttons, such as TRANSFER and ALL, are simply
shortcuts which are not available on a one-line display.
Other display buttons, such as OK and SHOW, perform essential
functions. For a one-line display telephone, use the following
buttons instead of these display buttons.
Modular ICS 6.0 System Coordinator Guide
³
. Your active call is put on hold and you are
P0992640 03
Advertisement
Table of Contents
