Syslog Messages In Alphabetical Order - Nortel Secure Network Access Switch 4050 User Manual

Table 203
NSNAS — INFO (Sheet 2 of 2)
Message
tunnelguard: user <username>[<pVIP>] –
SRS check failed, restrictingSRS – <SRS
rule> <comment> – <item> – <reason>
tunnelguard: user <username>[<pVIP>] –
SRS checks ok, open session

Syslog messages in alphabetical order

Table 204
Table 204
Syslog messages in alphabetical order (Sheet 1 of 10)
Message
[A:B:C:D] NSNA portdown
[A:B:C:D] NSNA portup
accept() turned off (<nr>) too
many fds
Application filesystem corrupt -
reinstall required
Category
INFO
INFO
lists the syslog messages in alphabetical order.
Severity Type
INFO NSNAS
INFO NSNAS
INFO Traffic
Processing
CRITICAL OS
Nortel Secure Network Access Switch 4050 User Guide
Appendix B Syslog messages 865
Explanation/Action
TunnelGuard applet report: The user with user
name <username>, logged on to the Nortel
SNAS 4050 portal with portal Virtual IP
address <pVIP>, has failed the SRS rule
check, and access is restricted in accordance
with the behavior configured for SRS rule
failure. To identify the rule, the message
includes the <SRS rule> name and additional
<comment> information defined for the rule.
The message also includes the element of the
SRS rule (<item>) that failed and the
<reason> (for example, file not found).
TunnelGuard applet report: The user with user
name <username>, logged on to the Nortel
SNAS 4050 portal with portal Virtual IP
address <pVIP>, has passed the SRS rule
check and is authorized to start a session in a
Green VLAN.
Explanation
Domain A, switch B, unit C, port D Ethernet
link is down.
Domain A, switch B, unit C, port D Ethernet
link is up.
The Nortel SNAS 4050 has temporarily
stopped accepting new connections. This
will happen when the Nortel SNAS 4050 is
overloaded. It will start accepting
connections once it has finished
processing its current sessions.
Reinstall.