Adding An Ntp Server - Nortel Secure Network Access Switch 4050 User Manual

530 Chapter 10 Configuring system settings

Adding an NTP server

To add an additional NTP server, perform the following steps:
1
2
Figure 146
3
Table 106
Field
IP Address
4
5
320818-A
Select the System > Date and Time tab.
The Date and Time screen appears (see
Click Add.
The Add NTP Server dialog box appears (see
Add NTP Server
Enter the NTP Server information in the applicable fields.
the Add NTP Server fields.
Add NTP Server fields
Click Add.
The NTP server appears in the NTP Server Table.
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Figure 145 on page
Description
Specifies the IP address of an NTP server. An index
number is automatically assigned to the server.
528).
Figure 146).
Table 106 describes