Displaying Or Saving A Certificate And Key Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

3
Enter the import information in the applicable fields.
Table 126
Table 126
Field
Protocol
Host
Filename
Username
Password
Password phrase
4
Click Apply on the toolbar to import the certificate.
5
Click Commit on the toolbar to save the imported certificate on the Nortel
SNAS 4050.
The certificate and private key are now fully installed.

Displaying or saving a certificate and key using the SREM

You can display the current certificate and private key and then save copies as
backup or for export to another device.
When you display the certificate and private key, you have the option to protect it
with a password phrase. Nortel recommends adding a password phrase, because
this adds an extra layer of security.
Save the certificate and private key by copying and pasting into a text editor, then
saving the text file with a .PEM extension.
describes the Import Certificate fields.
Import Certificate fields
Description
The file import protocol. The options are TFTP, FTP,
SCP, SFTP. The default is FTP.
The host name or IP address of the file exchange
server.
The name of the file on the file exchange server.
For FTP, SCP, and SFTP, the user name to access the
file exchange server.
For anonymous mode, the username is
For FTP, SCP, and SFTP, the password to access the
file exchange server.
For anonymous mode, the Nortel SNAS 4050 uses the
following string as the password (for logging purposes):
admin@<hostname>.isd
If the key is password protected, the password phrase
specified when the key was created or exported.
Nortel Secure Network Access Switch 4050 User Guide
Chapter 11 Managing certificates 605
.
.
anonymous