Configuring The Captive Portal Using The Srem; Enabling Dns Capture - Nortel Secure Network Access Switch 4050 User Manual

Customizing the portal and logon using the SREM
The following section describes the SREM procedures to customize the portal and
user logon. It includes the following topics:
•
•
•
•
•
•
•

Configuring the captive portal using the SREM

By default, the Nortel SNAS 4050 is set up to function as a captive portal. (For
more information about the captive portal in the Nortel SNAS 4050 domain, see
"Captive portal and Exclude List" on page
To configure the Nortel SNAS 4050 as a captive portal, complete the following
processes:
•
•

Enabling DNS capture

To configure the Nortel SNAS 4050 portal as a captive portal, perform the
following steps:
1
"Configuring the captive portal using the SREM" on page 416
"Changing the portal language using the SREM" on page 419
"Configuring the portal display using the SREM" on page 425
"Changing the portal colors using the SREM" on page 431
"Configuring custom content using the SREM" on page 433
"Configuring linksets using the SREM" on page 439
"Configuring links using the SREM" on page 444
"Enabling DNS capture" on page 416
"Configuring the DNS Exclude List using the SREM" on page 418
Select the Secure Access Domain > domain > DNS Capture tab.
The DNS Capture screen appears (see
Chapter 9 Customizing the portal and user logon 417
386.)
Figure
Nortel Secure Network Access Switch 4050 User Guide
105).