Deleting A Domain Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

Creating Domain 2
Creating Client Filter 1
Name: tg_passed
Creating Client Filter 2
Name: tg_failed
Creating Linkset 1
Name: tg_passed
This Linkset just prints the TG result
Creating Linkset 2
Name: tg_failed
This Linkset just prints the TG result
Creating Group 1
Name: tunnelguard
Creating Extended Profile 1
Giving full access when tg passed
Creating "green" vlan with id 110
Creating Access rule 1
Giving remediation access when tg failed
Creating Extended Profile 2
Creating "yellow" vlan with id 120
Creating Access rule 1
Using no SRS rule
Creating Authentication 1
Adding user 'tg' with password 'tg'
Using certificate 1
Use apply to activate the new domain.
>> Configuration#

Deleting a domain using the CLI

To delete a domain, use the following command:
/cfg/domain #/del
This command removes the current domain from the system configuration,
including all settings in menus and submenus for the portal, groups, authentication
services, linksets, and network access devices configured for that domain.
Chapter 4 Configuring the domain 129
Nortel Secure Network Access Switch 4050 User Guide