Configuring Extended Profiles Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

Figure 39 shows sample output for the
<filter ID>
Figure 39
>> Main# /cfg/domain 1/AAA/filter 3
Creating Client Filter 3
Filter name: branch_pass
----------------------------------------------------------
[Client Filter 3 Menu]
name
tg
comment
del
>> Client Filter 3# tg
Current value: ignore
TunnelGuard passed (true/false/ignore): true
>> Client Filter 3#

Configuring extended profiles using the CLI

To create and configure an extended profile, use the following command:
/cfg/domain 1/aaa/group <group ID|group name>/extend
[<profile ID>]
where
profile ID
profile in the group. If you do not enter the profile ID as part of the command, you
are prompted to do so.
When you first create the extended profile, you must enter the profile ID. After
you have created the extended profile, you can use either the profile ID or the
name of the associated client filter to access the extended profile for configuration.
command and commands on the Client Filter menu.
Client Filter menu commands
- Set filter name
- TunnelGuard checks passed
-Set comment
- Remove client filter
is an integer in the range 1 to 63 that uniquely identifies the
Nortel Secure Network Access Switch 4050 User Guide
Chapter 5 Configuring groups and profiles 203
/cfg/domain 1/aaa/filter