570 Chapter 11 Managing certificates
Topic
Exporting a certificate and key from the Nortel SNAS 4050 using the
Overview
To use the encryption capabilities of the Nortel SNAS 4050, you must add a key
and certificate that conforms to the X.509 standard.
The key and certificate apply to the cluster. It does not matter whether you connect
to the Management IP address (MIP) or Real IP address (RIP) of a Nortel
SNAS 4050 device in order to manage Secure Socket Layer (SSL) certificates.
When you add a key and certificate to one Nortel SNAS 4050 device in the
cluster, the information is automatically propagated to all other devices in the
cluster.
The Nortel SNAS 4050 can support the use of up to 1500 certificates. However,
only one server certificate can be mapped to a portal server at any one time. For
information about mapping a certificate to the portal server, see
settings using the CLI" on page 139
SREM" on page
If you ran the quick setup wizard during initial setup, a test certificate has been
installed and mapped to the Nortel SNAS 4050 portal.
320818-A
or
176.
"Configuring SSL settings using the
Page
601
603
605
607
610
"Configuring SSL