Removing A Radius Server - Nortel Secure Network Access Switch 4050 User Manual

Table 43
Add a Radius Server fields (continued)
Field
Port
Secret
4
Click Apply.
The new RADIUS server is automatically assigned a unique index number,
and appears in the RADIUS Server Table.
5
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Reordering additional RADIUS servers
To adjust the order in which RADIUS servers are used, perform the following
steps:
1
Select the Secure Access Domain > domain > AAA > Authentication >
radius > Radius Servers tab.
The RADIUS Servers screen appears (see
2 Select an RADIUS server entry from the RADIUS Server Table.
3
Use the up and down arrows to reposition the selected entry.
4 Click Apply on the toolbar to accept the new order, and adjust index numbers
for the RADIUS servers accordingly. Click Commit on the toolbar to save the
changes permanently.

Removing a RADIUS server

To remove an existing RADIUS server from the RADIUS Server Table, perform
the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
radius > Radius Servers tab.
Chapter 6 Configuring authentication 281
Description
Specifies the port number configured for this server to use
on the RADIUS server. The default is 1812.
Specifies a unique shared secret configured on the
RADIUS server that authenticates the Nortel SNAS 4050
to the RADIUS server.
Nortel Secure Network Access Switch 4050 User Guide
Figure 69 on page 291).