Creating A Default Group Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

230 Chapter 5 Configuring groups and profiles

Creating a default group using the SREM

To create a default group, first create a group with extended profiles mapped to a
restrictive VLAN (see
"Configuring extended profiles using the SREM" on page
following steps:
1
Figure 55
AAA Configuration screen
320818-A
"Configuring groups using the SREM" on page 208
Select the Secure Access Domain > domain > AAA tab.
The AAA Configuration screen appears (see
219). Then perform the
Figure 55).
and