Configuring The Captive Portal Using The Cli; Configuring The Exclude List Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

Configuring the captive portal using the CLI

By default, the Nortel SNAS 4050 is set up to function as a captive portal. (For
more information about the captive portal in the Nortel SNAS 4050 domain, see
"Captive portal and Exclude List" on page
To configure the Nortel SNAS 4050 portal as a captive portal, use the following
command:
/cfg/domain 1/dnscapt
The DNS Capture menu displays.
The DNS Capture menu includes the following options:
/cfg/domain 1/dnscapt
followed by:
exclude
ena
dis

Configuring the Exclude List using the CLI

The Exclude List is a list of domain names that will not be captured by the Nortel
SNAS 4050. (For more information about the Exclude List, see
page 387.)
To create and manage the Exclude List, use the following command:
/cfg/domain 1/dnscapt/exclude
The DNS Exclude menu displays.
Chapter 9 Customizing the portal and user logon 401
386.)
Accesses the DNS Exclude menu, in order to
configure the Exclude List (see
Exclude List using the CLI" on page
Enables captive portal functionality.
Disables captive portal functionality.
Nortel Secure Network Access Switch 4050 User Guide
"Configuring the
401).
"Exclude List" on