Viewing And Installing Host Licenses - Nortel Secure Network Access Switch 4050 User Manual

500 Chapter 10 Configuring system settings
2
Table 96
Field
Index
IP Address
System Name
System Location
IP Gateway
HW Platform
3

Viewing and installing host licenses

There are three ways to view installed licenses using the SREM:
•
•
•
320818-A
Enter the host information in the applicable fields.
fields.
Host fields
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
"Viewing global licenses for all hosts" on page 501
"Viewing per domain licenses for all hosts" on page 503
"Viewing installed licenses for a particular host" on page 505
Description
An integer automatically assigned to the host when you
perform initial setup on the Nortel SNAS 4050 device.
Sets the Real IP address (RIP) for Interface 1 on the
device. The RIP is the Nortel SNAS 4050 device host IP
address for network connectivity and must be unique on
the network. For more information, see
addresses" on page 51.
Changing the RIP does not affect the MIP for the cluster.
Assigns a name to the managed Nortel SNAS 4050 host.
The name is a useful mnemonic when managing the Nortel
SNAS 4050 using SNMP.
Identifies the physical location of the managed Nortel
SNAS 4050 host. The location description is a useful
mnemonic when managing the Nortel SNAS 4050 using
SNMP.
Sets the default gateway address for the device. The
default gateway is the IP address of the interface on the
core router that will be used if no other interface is
specified.
To specify a default gateway for Interface 1 traffic, use
Interface configuration screen (see
interfaces using the SREM" on page
Displays the hardware platform of the Nortel SNAS 4050
device.
Table 96 describes the Host
"About the IP
"Configuring host
508).