Managing Interface Ports Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

The Host Port menu includes the following options:
/cfg/sys/host #/port <port>
followed by:
autoneg on|off
speed <speed>
mode full|half

Managing interface ports using the CLI

To view and manage the ports assigned to an interface, use the following
command:
/cfg/sys/host #/interface <interface ID>/ports
where
interface ID
the interface on the Nortel SNAS 4050 host.
The Interface Ports menu displays.
Chapter 10 Configuring system settings 473
Specifies the Ethernet auto-negotiation setting for the
host and NIC port. The options are:
• — the port is set to auto-negotiate speed and
on
mode. This is the recommended setting.
• — speed and mode are fixed at a specified
off
setting.
The default is
When auto-negotiation is on, ensure that the device to
which the port is connected is also set to
auto-negotiate.
Sets the speed for the host and NIC port when
auto-negotiation is set to
• — the port speed in megabits per second.
speed
The options are
Sets the duplex mode for the host and NIC port when
auto-negotiation is set to
and .
half
The default duplex mode is
is an integer in the range 1 to 252 that uniquely identifies
Nortel Secure Network Access Switch 4050 User Guide
.
on
.
off
.
10|100|1000
. The options are
off
.
full
full