/cfg/cert <cert ID>
followed by:
display [<pass
phrase>]
show
info
subject
validate
keysize
keyinfo
del
Generating and submitting a CSR using the CLI
To prepare a CSR for submission to a CA, perform the following steps:
1
Access the Certificate menu by using the
command, where:
Chapter 11 Managing certificates 579
Displays the current key and certificate, in order to save
copies as backup or for export to another device. For
more information, see
certificate and key using the CLI" on page
The
display
command allows you to save private
keys and certificates in the PEM format. To save a
certificate and key in another format, use the
cert #/export
Displays detailed information about the certificate,
excluding the certificate name.
Displays the serial number, the expiration date, and the
values specified for the subject part of the current
certificate.
Displays detailed information about the subject part of
the current certificate.
For example:
C/countryName (2.5.4.6) = US
where:
•
countryName
•
is the object identifier (OID)
2.5.4.6
•
is the value
US
Validates that the private key matches the public key in
the current certificate.
Displays the key size of the private key in the current
certificate.
Displays information about how the private key
associated with the currently selected certificate is
protected. For the Nortel SNAS 4050, private keys are
protected by the cluster.
Removes the current certificate and private key.
Nortel Secure Network Access Switch 4050 User Guide
"Displaying or saving a
command.
is the mnemonic name
/cfg/cert <cert id>
591.
/cfg/