644 Chapter 12 Configuring SNMP
4
5
Managing SNMPv3 users
To manage SNMPv3 users, or configure permission sets for a new SNMPv3 user,
perform the following steps:
1
Figure 187
User Settings
320818-A
Click Apply.
The new SNMPv3 user appears in the table.
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Select the System > Administrative > SNMP > SNMPv3 Users > user >
User Settings tab.
The User Settings screen appears (see
Figure
187).