Configuring Nortel Snas 4050 Host Ssh Keys Using The Srem - Nortel Secure Network Access Switch 4050 User Manual

548 Chapter 10 Configuring system settings
2
Table 113
Field
SRS Port
Enabled
3
Configuring Nortel SNAS 4050 host SSH keys using the
SREM
The Nortel SNAS 4050 functions as both SSH client (for importing and exporting
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
The SSH host keys are a set of keys to be used by all hosts in the cluster in
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
During initial setup, there is an option to generate the SSH host keys
automatically.
To generate and manage the SSH keys used by Nortel SNAS 4050 hosts in the
cluster, perform the following steps:
1
2
320818-A
Enter the SRS Control information in the applicable fields.
describes the SRS Control Settings fields.
Add SSH Key fields
Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Note: SCP is not supported.
Select the System > Administrative > SSH Keys tab.
The SSH Keys screen appears.
Select from one of the following tasks:
Description
Specifies the TCP port used for communication with the
SRS administration server. The default is port 4443.
When checked, enables SRS administration, for creating
and managing SRS rules
Table 115
.