Configuring Rsa Servers Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

480 Chapter 10 Configuring system settings
/cfg/sys/dns/servers
followed by:
move <index number>
<new index number>

Configuring RSA servers using the CLI

To configure the symbolic name for the RSA server and import the
configuration file, use the following command:
/cfg/sys/rsa
The RSA Servers menu displays.
320818-A
Note: This feature is not supported in Nortel Secure Network Access
Switch Software Release 1.0.
Moves a server up or down the list of DNS servers in
the configuration.
• — the original index number of
index number
the server you want to move
•
new index number
representing the new position of the server in the
list
The index numbers of the remaining entries adjust
accordingly.
To view the index numbers of all configured DNS
servers, use the
list
— the index number
command.
sdconf.rec