Configuring Authentication Using The Srem; Chapter 6 Configuring Authentication - Nortel Secure Network Access Switch 4050 User Manual

Configuring authentication using the SREM

The basic steps for configuring and managing authentication are:
1
2
3
4
To configure authentication on the Nortel SNAS 4050 using the SREM, refer to
the following tasks:
•
•
•
•
•
•
Create the authentication methods.
Configure specific settings for the methods.
Specify the order in which the authentication methods will be applied.
Perform this step even if you define only one method on the Nortel
SNAS 4050.
Commit the configuration changes.
"Configuring authentication methods using the SREM" on page 270
"Configuring RADIUS authentication using the SREM" on page 271
"Configuring LDAP authentication using the SREM" on page 282
"Configuring local database authentication using the SREM" on page 298
"Specifying authentication fallback order using the SREM" on page 314
"Saving authentication settings" on page 316
Chapter 6 Configuring authentication 269
Nortel Secure Network Access Switch 4050 User Guide