Configuring Dns Servers And Settings Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

The NTP Servers menu includes the following options:
/cfg/sys/time/ntp
followed by:
list
del <index number>
add <IPaddr>

Configuring DNS servers and settings using the CLI

To configure DNS settings for the cluster, use the following command:
/cfg/sys/dns
The DNS Settings menu displays.
The DNS Settings menu includes the following options:
/cfg/sys/dns
followed by:
servers
cachesize <entries>
Chapter 10 Configuring system settings 477
Displays IP address information for all NTP servers
configured for the system, by index number.
Removes the specified NTP server from the system
configuration.
•
index number
automatically assigned to the server when you
added the server to the configuration.
To view the index numbers of all configured NTP
servers, use the
Adds an NTP server to the system configuration.
• is the IP address of the NTP server.
IPaddr
An index number is automatically assigned to the
server.
Accesses the DNS Servers menu, in order to manage
servers configured for the cluster (see
servers" on page
Specifies the size of the local DNS cache.
• is an integer in the range 0–10000
entries
indicating the maximum number of DNS entries in
the local DNS cache. The default is 1000.
Nortel Secure Network Access Switch 4050 User Guide
is the identification number
command.
list
"Managing DNS
479).