Using The Nortel Snas 4050 Domain Quick Setup Wizard In The Cli - Nortel Secure Network Access Switch 4050 User Manual

Figure 17
Creating a domain
>> Main# /cfg/domain
Enter domain number (1-256): 2
Creating Domain 2
Domain name: MyDomain
Enter Domain Portal Vips(comma separated): 10.40.40.100
Entering: SSH key menu
Generating new SSH key, this operation takes a few
seconds... done.
Leaving: SSH key menu
----------------------------------------------------------
[Domain 2 Menu]
name - Set Domain name
pvips - Set Portal VIP addr(s) for the domain
aaa - AAA menu
server - SSL server menu
portal - Portal look and feel menu
linkset - Portal linkset menu
switch - Switch menu
vlan - Vlan menu
sshkey - SSH key menu
dnscapt - Dns captive portal menu
httpredir - Http to Https redirection menu
quick - Quick switch setup wizard
adv - Advanced settings menu
del - Remove domain
Apply to activate.
>> Domain 2#
Using the Nortel SNAS 4050 domain quick setup wizard in the
CLI
To create a domain using the NSNAS quick setup wizard, use the following
command:
/cfg/quick
The NSNAS quick setup wizard is similar to the quick setup wizard available
during initial setup.
Chapter 4 Configuring the domain 123
Nortel Secure Network Access Switch 4050 User Guide