Enabling Tunnelguard Srs Administration Using The Cli; Configuring Nortel Snas 4050 Host Ssh Keys Using The Cli - Nortel Secure Network Access Switch 4050 User Manual

Enabling TunnelGuard SRS administration using the CLI

To create and modify the TunnelGuard Software Requirement Set (SRS) rules,
you must use the SREM (see
you can access the Rule Builder utility in the SREM, you must enable support for
SRS administration.
To configure support for managing the SRS rules, use the following command:
/cfg/sys/adm/srsadmin
The SRS Admin menu displays.
The SRS Admin menu includes the following options:
/cfg/sys/adm/srsadmin
followed by:
port <port>
ena
dis

Configuring Nortel SNAS 4050 host SSH keys using the CLI

The Nortel SNAS 4050 functions as both SSH client (for importing and exporting
logs using SFTP) and SSH server for secure management communications
between the Nortel SNAS 4050 devices in a cluster.
Note: SCP is not supported.
The SSH host keys are a set of keys to be used by all hosts in the cluster in
accordance with the Single System Image (SSI) concept. As a result, connections
to the MIP always appear to an SSH client to be to the same host.
Chapter 10 Configuring system settings 485
"TunnelGuard SRS Builder" on page
Specifies the TCP port used for communication with
the SRS administration server. The default is
port 4443.
Enables SRS administration, for creating and
managing SRS rules.
Disables SRS administration. The default is disabled.
Nortel Secure Network Access Switch 4050 User Guide
317). Before