892 Appendix F Configuring DHCP to auto-configure IP Phones
For information on the minimum firmware versions required to support IP Phones
in the Nortel SNA solution, see Release Notes for the Nortel Secure Network
Access Solution, Software Release 1.0 (320850-A).
Configuring IP Phone auto-configuration
To configure Windows 2000 Server DHCP to auto-configure the IP Phones,
perform the following steps:
1
2
3
Creating the DHCP options
1
320818-A
Create DHCP options (see
•
Call Server Information
•
VLAN Information for auto-discovery of the IP Phone VLAN ID
Configure the DHCP options (see
and VLAN Information options" on page
Repeat this step for the data (or boot) VLAN and the Phone VLAN.
Set up the IP Phone (see
On the Windows 2000 Server Start menu, select Programs > Administrative
Tools > DHCP.
The DHCP Management Console opens (see
"Creating the DHCP options" on page
"Configuring the Call Server Information
896)
"Setting up the IP Phone" on page
Figure 245 on page
892)
899)
893).