Modifying Local Database Configuration - Nortel Secure Network Access Switch 4050 User Manual

2
Enter the import information in the applicable fields.
Table 45 describes the Import Local User Database fields.
Table 51
Import Local User Database fields
Field
Protocol
Host
Filename
Pass Phrase/Key
Username
Password
3 Click Apply on the toolbar to import the specified local user database.

Modifying Local database configuration

You can modify the Local configuration in the following ways:
• Modify settings for the authentication method itself (see
method settings" on page
• Modify user settings in the local database (see
page 307).
• Modify user passwords in the local database (see
passwords" on page
Chapter 6 Configuring authentication 305
Description
Specifies the import protocol. Options are:
• ftp
• tftp
• sftp
• scp
The default is ftp.
Specifies the host name or IP address of the server.
Specifies the name of the database file on the server.
Specifies the password key for user password protection.
For a database file whose passwords were protected with a
key when the file was exported, the key you must provide is
the same as the password key provided at the time of
export. If the file is not protected with a key, enter any
characters (a minimum of four) when prompted.
For FTP, SFTP, and SCP, the user name and password to
access the file exchange server.
For FTP, SFTP, and SCP, the user name and password to
access the file exchange server.
306).
309).
Nortel Secure Network Access Switch 4050 User Guide
"Modifying Local
"Modifying local users" on
"Modifying local user