Adding A Radius Server - Nortel Secure Network Access Switch 4050 User Manual

280 Chapter 6 Configuring authentication
The RADIUS Server Table allows you to manage additional RADIUS servers by
performing any of the following procedures:
•
•
•

Adding a RADIUS server

To add additional RADIUS servers for redundancy, perform the following steps:
1
2
Figure 65
3
Table 43
Field
IP Address
320818-A
"Adding a RADIUS server" on page 280
"Reordering additional RADIUS servers" on page 281
"Removing a RADIUS server" on page 281
Select the Secure Access Domain > domain > AAA > Authentication >
radius > Radius Servers tab.
The RADIUS Servers screen appears (see
Click Add.
The Add a Radius Server dialog box appears (see
Add a Radius Server
Enter the RADIUS server information in the applicable fields.
Table 43 describes the Add a RADIUS Server fields.
Add a Radius Server fields
Figure 64 on page
Description
Specifies the IP address of the RADIUS server.
279).
Figure 65).