3
3.15
Stopping scanning/printing
The following procedure describes how to stop scanning the original and
stop the printing operation.
To stop scanning/printing
0 If an original is being scanned for a job, pressing the [Stop] key stops
scanning.
0 For details on deleting a stopped job, refer to "Deleting a stopped job" on
page 3-85.
1
Press the [Stop] key
while an original is being
scanned or a job is being
printed.
Scanning/printing stops.
The Stopped Jobs screen appears.
2
To continue all stopped jobs, press the [Start] key
3-84
Basic copy operations
Stop
Start
cm3521