Using The 4-Slot Cradles (1950 Mah Battery Only) - Symbol PDT 8100 Series Product Reference Manual

on page 1-13 for the times needed to fully charge the battery. See
1-25 for battery charging indications.
Using the 4-Slot Cradles
(1950 mAh Battery Only)
To charge the battery in the terminal using the CHS 8100-4000C 4-Slot Charging Cradle or
the CRD 8100-4200E 4-Slot Ethernet Cradle:
1. Connect the cradle to a power source
AC Line
Cord
Note: The CRD 8100-4200E
the back of the cradle: Power Port, Host Port and Expansion Port.
The CHS 8100-4000C (not pictured) has one Power Port for
connecting power.
3
Figure 1-12. CRD 8100-4200E Power Connection
(Figure 1-12).
Power
Port
Power
Supply
1
(Figure 1-12) has three connector ports on
Getting Started
LED Indicators
2
DC
Cable
on page
1-19