Capturing Images; Acquiring Images Of Documents And Signatures - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide
As needed, define/control the settings in this mode as follows:
• Adjust Brightness, Exposure and Analog Gain by moving the appropriate slide bar
with the stylus.
Note: When AE (Auto Exposure) is enabled, Brightness is enabled,
Exposure is disabled and Analog Gain is disabled. When AE is
disabled, Brightness is disabled, Exposure is enabled and Analog
Gain is enabled.
• Select a Focal Length from the drop-down list.
• Enable the LED, Aim, Auto Exposure and ViewFinder by tapping the appropriate
check box.
• Tap the Snap/Enable button to capture (snap) an image or enable the terminal.
The settings defined in this mode can also be defined in the AcqCap view (Tools - Imager
Settings - AcqCap view). See
Images on page C-28 for the steps to acquire the image.
Note: Tap File - Save to save any changes made in this mode. Otherwise,
image changes are discarded upon exit, or when a new file is
opened.

Capturing Images

The default location to save an acquired image is '\My Documents'. Acquired images are
named "ImageXXXX" (where XXXX = a four digit number, incremented sequentially). The
default file save path and file name can be changed in the Misc tab view in Tools - Imager
Settings. Acquired images can also be saved by selecting Save from the File menu and
renamed using the File Explorer.

Acquiring Images of Documents and Signatures

1. Launch the ImageDemo application by tapping Start - ImageDemo. The Symbol
Image Capture screen displays.
C-28
Table C-1 on page C-7 for field descriptions. See Capturing