Mode Tab - Symbol PDT 8100 Series Product Reference Manual

Mode Tab

Figure 9-3. PDT 8146 NICTT Properties - Mode Tab
The Mode tab in NICTT configures the adapter's ESSID and operating mode.
• Use the Operating Mode drop-down menu to select one of the following operating
modes for the terminal:
Note: The PDT 8146 does not support Ad Hoc mode.
• If you select Infrastructure, enter a 32-character maximum ESSID (802.11
Extended Service Set Identifier) in the 802.11 ESSID field to identify the
wireless local area network. This ESSID must match the access point ESSID
for the adapter to communicate with the access point.
• If you select Enhanced Ad Hoc, enter the channel number in the Channel field.
The first adapter configured in the Ad Hoc network defines the channel number
used in the Ad Hoc network. Each adapter is required to use the same channel
to transmit and receive data to its peers.
Spectrum24 Network Configuration
9-7