Vfcap Tab View - Symbol PDT 8100 Series Product Reference Manual

Field
Rotate Image
Flip Horizontal
Flip Vertical

VFCap Tab View

Tap the VFCap tab to display the VFCap view. The VFCap view is used to define and/or
control aspects of the viewfinder function.
Figure C-8. Symbol Image Capture - VFCap View
Table C-2. ImgCap Fields (Continued)
Specifies the amount, in degrees, that the acquired
image should be rotated. Some devices may
impose a minimum increment value.
This feature is not currently supported.
Specifies if the acquired image should be flipped on
the horizontal axis.
The default value is Disabled. Allowed values are
Enabled or Disabled.
Specifies if the acquired image should be flipped on
the vertical axis.
The default value is Disabled. Allowed values are
Enabled or Disabled.
ImageDemo Application
Description
C-13