Inserting A Compact Flash Card - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide
• CBL-8100-100-ON2
• CBL-8100-100-ZEB.
• MDM8100-150 Snap-On Modem Module allows dial-up connections of the
terminal to a remote host computer, while maintaining the portability of the terminal.
• MSR8100-100 Magstripe Reader Attachment snaps on to the terminal to add
magstripe capabilities.
• Stylus (p/n 160-0362) for performing pen functions.
• Symbol Software Developer's Kit (SDK) for the terminal.
• UBC Adapters:
• UBC Adapter for charging the 1950 mAh and 3000 mAh battery pack (p/n 21-
58234-01 and 21-56662-01).
Note: *The 3000 mAh lithium-ion battery is a larger capacity battery and
requires a larger battery door.
• TRG 8100-00 is a "Quick Grip" trigger handle for scanning with the terminal.
• VCA 8100-00 Auto Charging Adapter connects to the cigarette lighter in a vehicle
to charge the terminal.

Inserting a Compact Flash Card

The terminal contains a slot for a standard compact flash card, which includes a locking
mechanism that prevents the card from coming loose if the terminal is dropped. Insert the
compact flash card carefully to ensure it engages this locking mechanism.
1. Open the battery door. (If a battery is installed, use the stylus to unlock the battery
lock switch and remove the battery.)
2. Remove the flash card cover at the top of the battery compartment by pulling the
top out, and lifting the cover up.
3. Remove the dummy flash card shipped with the terminal.
1-8