Symbol PDT 8100 Series Product Reference Manual page 231

.
Error Text
Unknown error
Cancelled by user
Can't open the source
Can't open the destination
Can't read from the source
device
Can't write to the destination
device
Transmission checksum
error
Readback checksum error
Table 11-2. IPL Errors
Error Number
-1 A general error occurred. Retry the
download. If the failure persists, it is most
likely due to a hardware failure; the terminal
requires servicing.
-2 The user canceled the download.
-7 An error occurred opening the source device
(either Compact Flash card or Serial port).
Check source device connectivity and retry.
-8 An error occurred opening the destination
device (either flash ROM or Power Micro).
Retry the download. If the failure persists, it
is most likely due to a hardware failure; the
terminal requires servicing.
-9 The source device (either Compact Flash
card or Serial port) could not be read from.
Check source device connectivity and retry.
-10 The destination device (either flash ROM or
Power Micro) could not be written to. Retry
the download. If the failure persists, it is most
likely due to a hardware failure; the terminal
requires servicing.
-11 An error occurred during transmission from
the source device (either Compact Flash
card or Serial port) and the checksum check
failed. Check source device connectivity and
retry.
-12 A checksum, generated from reading back
data that was written to the destination
device, was incorrect. An error during
transmission or a write error to the
destination device could cause this.
Configuring The Terminal
Probable Cause
11-23