Edit Mode - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide

Edit Mode

Tap Mode - Edit to display the Edit mode:
Figure C-14. Symbol Image Capture - Edit Mode
As needed, define/control the settings in this mode as follows:
• Aim the viewfinder at an object and tap the '+' and '-' buttons to zoom in and out on
the image to capture.
• Adjust the Contrast by moving the slide bar with the stylus to lighten and darken
the image to capture.
See Capturing Images
Note: Tap File - Save to save any changes made in this mode. Otherwise,
image changes are discarded upon exit, or when a new file is
opened.
C-24
on page C-28 for the steps to acquire an image.