Symbol PDT 8100 Series Product Reference Manual page 250

PDT 8100 Series with Intel XScale Technology Product Reference Guide
Table 12-4. Troubleshooting The CRD 8100-1200M (continued)
Symptom
Terminal has Data is being transferred
successfully over S24 radio link.
connected through
modem, but no
data is being
transmitted over
the connection.
ActiveSync fails. A partnership was not
established with the host
computer.
12-14
Possible Cause Action
Temporarily disable the radio link to force data
transmission to use modem connection: Tap the
wireless LAN icon from the systray on the
Today screen. Tap the Mode or General tab.
Enter an invalid value in the ESSID: text box.
Power cycle the terminal. Verify that your radio
link was disabled (the wireless LAN icon has a
red box with a "!" on it).
Once you have completed your data
transmission via modem, re-enable your radio
link.
Establish a partnership with the host computer.
See Setting up a Partnership on page 4-4.