Using Activesync - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide

Using ActiveSync

1. On the terminal, tap Start - Settings - System - eConnect and ensure the following
settings are made:
Figure 4-14. eConnect Settings - Ethernet ActiveSync Setup
2. Tap the OK button.
3. Insert the terminal into the cradle. The cradle's communication LED turns red, then
flashes green, indicating that the host computer and terminal are communicating.
See Communication LED Indicator
4. On the terminal, a succession of dialog boxes appear, indicating the status of the
connection. When successfully connected and synchronized, the status of the host
computer is Connected/Synchronized.
Note: If you remove the terminal from the cradle while the LED is flashing
green, you disrupt communication and data may be lost. When the
terminal finishes communicating, the slot's LED turns solid green
until the terminal is removed from the slot.
5. To close your ActiveSync session, tap Stop. You may remove the terminal when
the connection has closed itself.
4-26
on page 4-27 for other indications.