Charging Spare Batteries; Using The Single-Slot Cradles - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide

Charging Spare Batteries

A spare battery can be charged using either of the single-slot cradles (CRD8000-1000S or
CRD8000-1000M), the four-slot cradles (CHS8000-4000B or CRD8000-4000E), the
vehicle cradle (VCD8000-R000) or the UBC Adaptor (p/n 21-32665-33).
Do not charge a battery that is below 0° C (32° F) or above 45° C (113° F).
Allow the battery to warm up to room temperature before charging.

Using the Single-Slot Cradles

1. Connect the cradle to a power source.
2. Slide the latches on both sides of the battery up, to ensure they are in the unlock
position.
3. Insert the battery into the Spare Battery Charging slot on the back of the cradle.
Position it with the charging contacts facing down (over charging pins) and gently
press down on the battery to ensure proper contact.
4. Lock the battery into place by sliding the latches on the battery down.
1-18
Caution
UNLOCK
LOCK