Led Indicators - Symbol PDT 8100 Series Product Reference Manual

LED Indicators

Note: Charging LED indicators are on cradles.
LED Status
Using the Serial Charging Cable
The Serial Charging Cable has no LED. For the terminal's battery status, view the
Power screen on the terminal in System Settings.
Using the Snap-on Modem Module
The Snap-on Modem Module has no LED. For the terminal's battery status, view
the Power screen on the terminal in System Settings.
Using the Snap-on Charging Adapter
Solid Green
Using Single Slot Cradles
No Light
Solid Red
Solid Green
Using the CHS 8100-4000C 4-Slot Cradle
No Light
Solid Red
Table 1-1. Charging the Battery in the Terminal
Charging Adapter is plugged into the accessory
outlet (cigarette lighter receptacle) of your vehicle.
For the terminal's battery status, view the Power
screen on the terminal in System Settings.
No cradle power present, no terminal inserted in
cradle, or terminal is not seated in cradle slot.
Terminal battery is charging or the terminal is in a
mode requiring a higher current draw from the
cradle.
Note: The Terminal Battery Charge Status LED
may flicker when the terminal is in a mode requiring
a higher current draw.
The battery is fully charged.
Cradle is not powered; terminal(s) not placed
correctly; or, there is no terminal in the cradle.
Terminal battery is charging.
Getting Started
Indication
1-25