Symbol PDT 8100 Series Product Reference Manual page 311

Note: When ImageDemo is launched, the image and mode view that
appears on the terminal's display varies. When ImageDemo is
launched for the first time, or after a soft reset, a video image in
Capture mode appears on the terminal's display.
2. Ensure the terminal is in still image Capture mode by selecting Capture from the
Mode menu (Figure
3. Ensure the imager is enabled. The imager is enabled when a video image appears
on the terminal's display.
To enable the imager, press the trigger or tap Enable in Capture mode.
4. Enable the following features by tapping their respective check boxes:
• LED (illumination): illuminates the target.
• Aim (laser aim): creates a targeting pattern.
• AE (auto exposure): automatically adjusts the exposure settings (light, time,
etc.). Selecting this feature is recommended.
• ViewFinder: when enabled, the image to capture appears on the terminal's
display.
5. Aim the exit window at the image to capture.
6. Align the document or signature within the corners of the target.
Figure C-18. Symbol Image Capture - Signature Capture Screen
C-17).
ImageDemo Application
C-29