CHS 8100-4000C
Problem
LED does not light when
the cradle is powered on.
LED stays green when the
terminal is inserted.
Table 12-3. Troubleshooting The CHS 8100-4000C
Cause
Cradle is not receiving
power.
Terminal is not seated
firmly in the cradle.
The battery is not properly
installed in the terminal.
The battery is charged.
Maintenance and Troubleshooting
Solution
Ensure the power supply is securely
connected and receiving power.
Ensure the battery is properly installed in
the terminal, and re-seat the terminal in
the cradle.
Normal status
12-11