Format Mode
Tap Mode - Format to display the Format mode:
Figure C-13. Symbol Image Capture - Format Mode
As needed, define/control the settings in this mode as follows:
•
Select a format from the File Format drop-down list.
•
Adjust the JPEG Quality by moving the slide bar with the stylus. You can also enter
a numeric value in the box to the right of the slide bar.
•
Enter a JPEG File Size.
The settings defined in this mode can also be defined in the ImgCap tab view (Tools -
Imager Settings - ImgCap tab). See
Capturing Images
on page C-28 for the steps to acquire an image.
Note: Tap File - Save to save any changes made in this mode. Otherwise,
image changes are discarded upon exit, or when a new file is
opened.
Table C-2 on page C-10
ImageDemo Application
for field descriptions. See
C-23