Symbol PDT 8100 Series Product Reference Manual page 294

PDT 8100 Series with Intel XScale Technology Product Reference Guide
Field
Crop Settings
Use Video VF Crop Settings Specifies if the cropping defined for the viewfinder
Negative Image
C-12
Table C-2. ImgCap Fields (Continued)
X Coordinate: Specifies, in pixels, the X coordinate
of the top, left corner of the rectangle that is used to
crop the acquired image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Y Coordinate: Specifies, in pixels, the Y coordinate
of the top, left corner of the rectangle that is used to
crop the acquired image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Width: Specifies, in pixels, the width of the
rectangle that is used to crop the acquired image. If
the current value is set to 0 this capability is ignored
and the device uses a width that encompasses the
entire acquired image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Height: Specifies, in pixels, the height of the
rectangle that is used to crop the acquired image. If
the current value is set to 0 this capability is ignored
and the device uses a height that encompasses the
entire acquired image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
should be used for image retrieval as well. If this
field is enabled, all image capabilities crop settings
are ignored and all viewfinder capabilities are used
instead.
The default value is Disabled. Allowed values are
Enabled or Disabled.
Specifies if the bits in the acquired image should be
negated, providing a negative image.
The default value is Disabled. Allowed values are
Enabled or Disabled.
Description