Symbol PDT 8100 Series Product Reference Manual page 68

PDT 8100 Series with Intel XScale Technology Product Reference Guide
Key
Note:
1
Press Func, then another key to produce the value or function above that key. See
individual key descriptions in this table for additional Function key usage.
2
Press Func + Ctrl + Clear to close applications.
Backlight
Caps/Shift
Clear
Cursor keys:
C, G, H, I
End
Escape/Enter
Power
Scan
Send
2-12
Table 2-4. 47-key Keyboard Actions
See Using the Backlight Button
Press Shift when in alpha mode, then another key to capitalize the
letter on that key.
Press Func + Shift to toggle All Caps on and off. Func + Shift also
erases all entered data from the screen.
Press Clear to generate an Escape key. This is application
dependent but typically closes a window or clears the screen.
Press Func + a cursor key to move the cursor up, down, left, and
right on the screen.
Press End to generate an End key. This is application dependent but
typically moves the cursor to the end of line.
Press Enter after entering data or a command.
Press Func + Enter to generate an Escape key. This is application
dependent but typically closes a window or clears the screen.
See Using the Power Button
Press Scan to scan bar codes. (Also use right and left scan triggers.)
When an imager application is running, the scan trigger can be used
to acquire an image. (This is application dependent and applicable
only to terminals with an integrated imager.)
Note: By default, each scan trigger appears to be Trigger #1. The
actual trigger cannot be determined via software. A registry entry
exists to have the Triggers act independently as Trigger #1 to Trigger
#5, so that separate actions can be assigned to the triggers. For
more details, refer to the Windows CE Software Developer's Kit for
Symbol Terminals (Help File).
The Send key is application dependent.
Action
on page 2-3.
on page 2-3.