Table C-3. VFCap Fields (Continued)
Field
Crop Start
Description
X Coordinate: Specifies, in pixels, the X coordinate
of the top, left corner of the rectangle that is used to
crop the viewfinder image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Y Coordinate: Specifies, in pixels, the Y coordinate
of the top, left corner of the rectangle that is used to
crop the viewfinder image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Width: Specifies, in pixels, the width of the
rectangle that is used to crop the viewfinder image.
If the current value is set to 0 this capability is
ignored and the device uses a width that
encompasses the entire viewfinder image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
Height: Specifies, in pixels, the height of the
rectangle that is used to crop the viewfinder image.
If the current value is set to 0 this capability is
ignored and the device uses a height that
encompasses the entire viewfinder image.
The default value is 0. Allowed values are any
value equal to or greater than 0.
ImageDemo Application
C-15