Symbol PDT 8100 Series Product Reference Manual page 224

PDT 8100 Series with Intel XScale Technology Product Reference Guide
5. The Select Transport menu displays (see
Up and Down arrow keys to select the transport method on this screen. The
choices are Serial Port or Compact Flash (CF) card.
Note: The first time this menu is entered, the default transport method is
Serial Port. When accessed again, the default transport method is
the method selected the previous time. If the timer is on, the default
is selected after 10 seconds.
• To download the images serially from a host PC running TCM, select Serial
Port, then press the Enter key to display the Select Baud Rate menu (see
Figure 11-3).
• To download the images from a Compact Flash card inserted in the terminal,
select CF Card, then press the Enter key to display the Select File Name menu
(see Figure
11-16
Select Transport
Serial Port
CF Card
Previous
Top
IPL V1.07.1987
Figure 11-2. Select Transport Menu
11-4).
Figure 11-2). In manual mode, use the
Timer: OFF