Symbol PDT 8100 Series Product Reference Manual page 223

Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
ROM Files
Splash Screen
Power Micro
Partition Table
Auto Select
IPL V1.07.1987
Figure 11-1. IPL Main Menu/No Power Screen
• The Initial Program Loader main menu lists the partitions/applications that can
be downloaded. Auto Select (for TCM downloads only) is the default selection
and is selected if no other selection is made within 10 seconds. The version
number on the bottom of the screen identifies the version of IPL being used. By
default, each screen times out after 10 seconds.
Note: To replace the IPL, choose Monitor from the list because IPL is a
component of the Monitor. If updating the Monitor/IPL hex image, the
terminal reboots after downloading the image. If the platform or
application partition sizes are changed, you must download a new
partition table first. Partition table updates take effect immediately;
there is no need to reboot.
4. To manually select the partitions/applications to download, use the Up and Down
arrow keys to select the partition to be received, then press the Enter key.
or
Allow Auto Select to download several partitions in sequence. (Auto Select can
only be used to download and receive files via the TCM utility running on a host
PC.)
Timer: OFF
Configuring The Terminal
No AC Power is detected!
IPL Requires AC
Plug in AC Power
then Press Enter ...
WARNING: Removing power
during IPL updates may
render unit inoperable
IPL V1.07.1987
11-15