Symbol PDT 8100 Series Product Reference Manual page 300

PDT 8100 Series with Intel XScale Technology Product Reference Guide
Field
Color Format
Bit Order
RGB Data Format
Light Source Color
Get Image Timeout
C-18
Table C-4. DevCap Fields (Continued)
The color format of the pixel data the imaging
device is capable of acquiring.
The default value is Gray 8bit (Mono 8-bit) and
cannot be changed.
Specifies how the bytes in an image are filled by the
source. MSB indicates that the leftmost bit in the
byte (usually bit 7) is the byte's most significant bit.
The default value is MSB and cannot be changed.
Specifies the available color data formats. There
are two options, Planar and Chunky. In Planar
mode, the RGB data is transferred one plane at a
time; first the entire red plane, then the entire green
plane, and finally the entire blue plane. In Chunky
mode, the RGB data for each pixel is transferred in
an interface fashion, one pixel at a time (R-G-B, R-
G-B, etc.).
The default value is Chunky and cannot be
changed.
Describes the general color characteristic of the
integrated light source.
The default value is Red and cannot be changed.
Defines the maximum length of time, in
milliseconds, for the hardware to capture an image
based on capture settings (i.e., exposure).
The default value is 4000. Any value is allowed.
Description