Country Setup - Symbol PDT 8100 Series Product Reference Manual

PDT 8100 Series with Intel XScale Technology Product Reference Guide
3. Tap Start - ModemSync. The modem dial-out commences and, if successful, a
series of dialog boxes pop-up in succession, as shown in
4. When connected, Internet Explorer starts. You can now surf the Internet, if
permitted by the server.
5. To disconnect, tap the two arrows on the navigation bar to expose the Connected
dialog box.
6. Tap the End button.

Country Setup

The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it's operating
parameters to comply with the telephone network in the country specified.
Edit Extra dial-string modem commands: text box to set country parameters.
The syntax used is - +GCI=<country_code>;
Country
Austria
Belgium
4-16
Figure 4-12. Modem Dial-out Dialog
Table 4-1. Supported Countries and Their Codes
Code Country
FD or 0A Greece
FD or 0F Iceland
Figure
Code Country
46 Norway
FD Portugal
4-12.
Code
FD or 82
8B