Symbol PDT 8100 Series Product Reference Manual page 245

Table 12-1. Troubleshooting The Terminal (continued)
Problem
Terminals with an integrated imager:
The terminal does not save
images.
Aim Target or Illumination
is not available.
Cause
The still Image Capture
program is not enabled.
Aim or Illumination may
be turned off.
Maintenance and Troubleshooting
Solution
Enable Image Capture.
The still Image Capture program is
application dependent. To enable the
ImageDemo application, select ImageDemo
from the Start menu. Tap the Snap button (in
Capture mode) or press the scan trigger to
enable the ImageDemo.
Enable Aim or Illumination.
The still Image Capture program is
application dependent. To enable the Aim
and Illumination features in the ImageDemo
application, select ImageDemo from the
Start menu. Select Capture from the Mode
menu. Tap the Aim and/or Illumination
check boxes to enable.
12-9