Country Setup - Symbol PDT 8000 Series Product Reference Manual

2. Tap the OK button.
3. Tap Start - ModemSync. The modem dial-out commences and, if successful, a
series of dialog boxes pop-up in succession, as shown below:
4. When connected, Internet Explorer starts. You can now surf the Internet, if
permitted by your server.
5. To disconnect, tap the two arrows on the navigation bar to expose the Connected
dialog box.
6. Tap the End button.

Country Setup

The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it's operating
parameters to comply with the telephone network in the country specified.
Edit Extra dial-string modem commands: text box to set country parameters.
The syntax used is: +GCI=<country_code>;
The supported countries and there codes are:
Country
Austria
Belgium
Brazil
Code Country
FD or 0A Greece
FD or 0F Iceland
16 Ireland
Code Country
46 Norway
FD Portugal
FD or 57 Spain
Communications
Code
FD or 82
8B
FD or A0
4-23