Getting Started
Before You Use the Terminal
Install and Charge Battery
Prior to using the PDT 7200 for the first time, charge the Lithium-Ion battery. The battery
can be charged while in the terminal or charged separately in the cradle's charging slot.
Refer to
Chapter 3, Cradle Setup and
Operation, for instructions on setting up the cradle
and charging the terminal's battery.
Configure the Terminal
Terminal configuration consists of loading the software and applications into terminal
storage and setting the terminal's operating parameters. For more information on
configuration issues and considerations and an overview of the process, refer to Chapter
4, Terminal Configuration Issues. For configuration procedures, refer to Chapters 5-10.
Run Setup
Run the Setup, described in
Chapter 9, Terminal Configuration: Setup
before using the
terminal for the first time.
1-7